Oracle RAC Interview Question & Answer.
1. Where are the clusterware files stored on a RAC environment?
The clusterware is installed on each node (on an Oracle Home) and on the shared disks (the voting disks and the CSR file)
The clusterware is installed on each node (on an Oracle Home) and on the shared disks (the voting disks and the CSR file)
2. Where are the database software files stored on a RAC environment?
The base software is installed on each node of the cluster and the
database storage on the shared disks.
database storage on the shared disks.
3. What kind of storage we can use for the shared clusterware files?
- OCFS (Release 1 or 2)
- raw devices
- third party cluster filesystem such as GPFS or Veritas
- OCFS (Release 1 or 2)
- raw devices
- third party cluster filesystem such as GPFS or Veritas
4. What kind of storage we can use for the RAC database storage?
- OCFS (Release 1 or 2)
- ASM
- raw devices
- third party cluster filesystem such as GPFS or Veritas
- OCFS (Release 1 or 2)
- ASM
- raw devices
- third party cluster filesystem such as GPFS or Veritas
5. What is a CFS?
A cluster File System (CFS) is a file system that may be accessed (read and write) by all members in a cluster at the same time. This implies that all members of a cluster have the same view.
A cluster File System (CFS) is a file system that may be accessed (read and write) by all members in a cluster at the same time. This implies that all members of a cluster have the same view.
6. What is an OCFS2?
The OCFS2 is the Oracle (version 2) Cluster File System which can be used for the Oracle Real Application Cluster.
The OCFS2 is the Oracle (version 2) Cluster File System which can be used for the Oracle Real Application Cluster.
7. Which files can be placed on an Oracle Cluster File System?
- Oracle Software installation (Windows only)
- Oracle files (controlfiles, datafiles, redologs, files described by the bfile datatype)
- Shared configuration files (spfile)
- OCR and voting disk
- Files created by Oracle during runtime
- Oracle Software installation (Windows only)
- Oracle files (controlfiles, datafiles, redologs, files described by the bfile datatype)
- Shared configuration files (spfile)
- OCR and voting disk
- Files created by Oracle during runtime
Note: There are some platform specific limitations.
8. Do you know another Cluster Vendor?
HP Tru64 Unix, Veritas, Microsoft
HP Tru64 Unix, Veritas, Microsoft
9. How is possible to install a RAC if we don’t have a CFS?
This is possible by using a raw device.
This is possible by using a raw device.
10. What is a raw device?
A raw device is a disk drive that does not yet have a file system set up. Raw devices are used for Real Application Clusters since they enable the sharing of disks.
A raw device is a disk drive that does not yet have a file system set up. Raw devices are used for Real Application Clusters since they enable the sharing of disks.
11. What is a raw partition?
A raw partition is a portion of a physical disk that is accessed at the lowest possible level. A raw partition is created when an extended partition is created and logical partitions are assigned to it without any formatting. Once formatting is complete, it is called cooked partition.
A raw partition is a portion of a physical disk that is accessed at the lowest possible level. A raw partition is created when an extended partition is created and logical partitions are assigned to it without any formatting. Once formatting is complete, it is called cooked partition.
12. When to use CFS over raw?
A CFS offers:
- Simpler management
- Use of Oracle Managed Files with RAC
- Single Oracle Software installation
- Autoextend enabled on Oracle datafiles
- Uniform accessibility to archive logs in case of physical node failure
- With Oracle_Home on CFS, when you apply Oracle patches CFS guarantees that the updated Oracle_Home is visible to all nodes in the cluster.
A CFS offers:
- Simpler management
- Use of Oracle Managed Files with RAC
- Single Oracle Software installation
- Autoextend enabled on Oracle datafiles
- Uniform accessibility to archive logs in case of physical node failure
- With Oracle_Home on CFS, when you apply Oracle patches CFS guarantees that the updated Oracle_Home is visible to all nodes in the cluster.
Note: This option is very dependent on the availability of a CFS on your platform.
13. When to use raw over CFS?
- Always when CFS is not available or not supported by Oracle.
- The performance is very, very important: Raw devices offer best performance without any intermediate layer between Oracle and the disk.
Note: Autoextend fails on raw devices if the space is exhausted. However the space could be added online if needed.
- Always when CFS is not available or not supported by Oracle.
- The performance is very, very important: Raw devices offer best performance without any intermediate layer between Oracle and the disk.
Note: Autoextend fails on raw devices if the space is exhausted. However the space could be added online if needed.
14. What CRS is?
Oracle RAC 10g Release 1 introduced Oracle Cluster Ready Services (CRS), a platform-independent set of system services for cluster environments. In Release 2, Oracle has renamed this product to Oracle Clusterware.
Oracle RAC 10g Release 1 introduced Oracle Cluster Ready Services (CRS), a platform-independent set of system services for cluster environments. In Release 2, Oracle has renamed this product to Oracle Clusterware.
15. What is VIP IP used for?
It returns a dead connection IMMIDIATELY, when its primary node fails. Without using VIP IP, the clients have to wait around 10 minutes to receive ORA-3113: “end of file on communications channel”. However, using Transparent Application Failover (TAF) could avoid ORA-3113.
It returns a dead connection IMMIDIATELY, when its primary node fails. Without using VIP IP, the clients have to wait around 10 minutes to receive ORA-3113: “end of file on communications channel”. However, using Transparent Application Failover (TAF) could avoid ORA-3113.
16. Why we need to have configured SSH or RSH on the RAC nodes?
SSH (Secure Shell,10g+) or RSH (Remote Shell, 9i+) allows “oracle” UNIX account connecting to another RAC node and copy/ run commands as the local “oracle” UNIX account.
SSH (Secure Shell,10g+) or RSH (Remote Shell, 9i+) allows “oracle” UNIX account connecting to another RAC node and copy/ run commands as the local “oracle” UNIX account.
17. Is the SSH, RSH needed for normal RAC operations?
No. SSH or RSH are needed only for RAC, patch set installation and clustered database creation.
No. SSH or RSH are needed only for RAC, patch set installation and clustered database creation.
18. Do we have to have Oracle RDBMS on all nodes?
Each node of a cluster that is being used for a clustered database will typically have the RDBMS and RAC software loaded on it, but not actual data files (these need to be available via shared disk).
Each node of a cluster that is being used for a clustered database will typically have the RDBMS and RAC software loaded on it, but not actual data files (these need to be available via shared disk).
19. What are the restrictions on the SID with a RAC database? Is it limited to 5 characters?
The SID prefix in 10g Release 1 and prior versions was restricted to five characters by install/ config tools so that an ORACLE_SID of up to max of 5+3=8 characters can be supported in a RAC environment. The SID prefix is relaxed up to 8 characters in 10g Release 2, see bug 4024251 for more information.
The SID prefix in 10g Release 1 and prior versions was restricted to five characters by install/ config tools so that an ORACLE_SID of up to max of 5+3=8 characters can be supported in a RAC environment. The SID prefix is relaxed up to 8 characters in 10g Release 2, see bug 4024251 for more information.
20. Does Real Application Clusters support heterogeneous platforms?
The Real Application Clusters do not support heterogeneous platforms in the same cluster.
The Real Application Clusters do not support heterogeneous platforms in the same cluster.
21. Are there any issues for the interconnect when sharing the same switch as the public network by using VLAN to separate the network?
RAC and Clusterware deployment best practices suggests that the interconnect (private connection) be deployed on a stand-alone, physically separate, dedicated switch. On big network the connections could be instables.
22. What is the Load Balancing Advisory?
To assist in the balancing of application workload across designated resources, Oracle Database 10g Release 2 provides the Load Balancing Advisory. This Advisory monitors the current workload activity across the cluster and for each instance where a service is active; it provides a percentage value of how much of the total workload should be sent to this instance as well as service quality flag.
To assist in the balancing of application workload across designated resources, Oracle Database 10g Release 2 provides the Load Balancing Advisory. This Advisory monitors the current workload activity across the cluster and for each instance where a service is active; it provides a percentage value of how much of the total workload should be sent to this instance as well as service quality flag.
23. How many nodes are supported in a RAC Database?
With 10g Release 2, we support 100 nodes in a cluster using Oracle Clusterware, and 100 instances in a RAC database. Currently DBCA has a bug where it will not go beyond 63 instances. There is also a documentation bug for the max-instances parameter. With 10g Release 1 the Maximum is 63.
With 10g Release 2, we support 100 nodes in a cluster using Oracle Clusterware, and 100 instances in a RAC database. Currently DBCA has a bug where it will not go beyond 63 instances. There is also a documentation bug for the max-instances parameter. With 10g Release 1 the Maximum is 63.
24. What is the Cluster Verification Utiltiy (cluvfy)?
The Cluster Verification Utility (CVU) is a validation tool that you can use to check all the important components that need to be verified at different stages of deployment in a RAC environment.
The Cluster Verification Utility (CVU) is a validation tool that you can use to check all the important components that need to be verified at different stages of deployment in a RAC environment.
25. What versions of the database can I use the cluster verification utility (cluvfy) with?
The cluster verification utility is release with Oracle Database 10g Release 2 but can also be used with Oracle Database 10g Release 1.
The cluster verification utility is release with Oracle Database 10g Release 2 but can also be used with Oracle Database 10g Release 1.
26. If I am using Vendor Clusterware such as Veritas, IBM, Sun or HP, do I still need Oracle Clusterware to run Oracle RAC 10g?
Yes. When ceritifed, you can use Vendor clusterware however you must still install and use Oracle Clusterware for RAC. Best Practice is to leave Oracle Clusterware to manage RAC. For details see Metalink Note 332257.1 and for Veritas SFRAC see 397460.1.
Yes. When ceritifed, you can use Vendor clusterware however you must still install and use Oracle Clusterware for RAC. Best Practice is to leave Oracle Clusterware to manage RAC. For details see Metalink Note 332257.1 and for Veritas SFRAC see 397460.1.
27. Is RAC on VMWare supported?
Yes.
Yes.
28. What is hangcheck timer used for ?
The hangcheck timer checks regularly the health of the system. If the system hangs or stop the node will be restarted automatically.
There are 2 key parameters for this module:
-> hangcheck-tick: this parameter defines the period of time between checks of system health. The default value is 60 seconds; Oracle recommends setting it to 30seconds.
-> hangcheck-margin: this defines the maximum hung delay that should be tolerated before hangcheck-timer resets the RAC node.
The hangcheck timer checks regularly the health of the system. If the system hangs or stop the node will be restarted automatically.
There are 2 key parameters for this module:
-> hangcheck-tick: this parameter defines the period of time between checks of system health. The default value is 60 seconds; Oracle recommends setting it to 30seconds.
-> hangcheck-margin: this defines the maximum hung delay that should be tolerated before hangcheck-timer resets the RAC node.
29. Is the hangcheck timer still needed with Oracle RAC 10g?
Yes.
Yes.
30. What files can I put on Linux OCFS2?
For optimal performance, you should only put the following files on Linux OCFS2:
- Datafiles
- Control Files
- Redo Logs
- Archive Logs
- Shared Configuration File (OCR)
- Voting File
- SPFILE
For optimal performance, you should only put the following files on Linux OCFS2:
- Datafiles
- Control Files
- Redo Logs
- Archive Logs
- Shared Configuration File (OCR)
- Voting File
- SPFILE
31. Is it possible to use ASM for the OCR and voting disk?
No, the OCR and voting disk must be on raw or CFS (cluster file system).
No, the OCR and voting disk must be on raw or CFS (cluster file system).
32. Can I change the name of my cluster after I have created it when I am using Oracle Clusterware?
No, you must properly uninstall Oracle Clusterware and then re-install.
No, you must properly uninstall Oracle Clusterware and then re-install.
33. What the O2CB is?
The O2CB is the OCFS2 cluster stack. OCFS2 includes some services. These services must be started before using OCFS2 (mount/ format the file systems).
The O2CB is the OCFS2 cluster stack. OCFS2 includes some services. These services must be started before using OCFS2 (mount/ format the file systems).
34. What the OCR file is used for?
OCR is a file that manages the cluster and RAC configuration.
OCR is a file that manages the cluster and RAC configuration.
35. What the Voting Disk file is used for?
The voting disk is nothing but a file that contains and manages information of all the node memberships.
The voting disk is nothing but a file that contains and manages information of all the node memberships.
No comments:
Post a Comment